#REDIRECT [[:Category:Dropping FTTC]]
37 bytes (4 words) - 11:55, 19 March 2015
==Ethernet with FTTC/ADSL fallback==
=Bonding FTTC Circuits=
2 KB (340 words) - 17:17, 20 March 2019
The line profile on a FTTC line is managed by Openreach, and it is very hard for AAISP Support to get
194 bytes (38 words) - 11:13, 25 February 2015
See below for details on running Status Tests on BT ADSL, BT FTTC and TalkTalk ADSL lines...
==BT FTTC End to End Test==
3 KB (569 words) - 00:06, 15 March 2017
!4 port, wifi, FTTC, ADSL, Bridge modem
!4 port, 2.4ghz and 5ghz wifi, FTTC, ADSL, Bridge modem, analogue phone compatible
4 KB (720 words) - 10:04, 8 June 2021
This is a table of popular VDSL/FTTC modems and routers and how you can tell if they are in sync or not by looki
[[Category:FTTC Down]]
2 KB (303 words) - 16:21, 21 June 2017
...ple - to the main office switch), and the rest for connections to the ADSL/FTTC modems.
As there are 4 ports are we restricted to only bonding up to 3 ADSL/FTTC lines? No.
4 KB (686 words) - 08:31, 22 May 2020
...lly A&A customers bond a BT and a TT line for greater resilience. Multiple FTTC lines can be bonded together too in the same way.
2 KB (371 words) - 09:28, 19 March 2018
*BT provided FTTC or FTTP
If you have a BT provided ADSL, FTTC or FTTP line, then on request, support staff can set automatic line testing
3 KB (547 words) - 17:09, 2 February 2017
==FTTC==
Interleaving on a VDSL/FTTC line is managed by Openreach. It is very hard for us to persuade BT or Talk
4 KB (653 words) - 14:19, 19 September 2021
If using the TG582n with an external modem (e.g. an Openreach modem with FTTC) then the Broadband and Internet LEDs will work better if the router is
865 bytes (132 words) - 00:18, 18 August 2018
With, for example FTTC, where a modem is provided for you, or with BT FTTP or a CityFibre service
[[Category:FTTC Faults]]
2 KB (318 words) - 14:28, 27 July 2023
...t was launched early 2016. It uses TalkTalk back-haul and provides a VDSL (FTTC) connection with a monthly usage quota of 1 terabyte.
675 bytes (111 words) - 16:01, 17 February 2016
Openreach carry out conformance testing on FTTC modems to ensure they meet BT's SIN498 standard. This is a long-winded test
824 bytes (134 words) - 12:43, 9 June 2015
*Use VDSL (FTTC), or if possible an Ethernet 'leased-line' connection for lower latency and
799 bytes (137 words) - 09:08, 2 July 2019
...led. The socket at the top is a RJ11 socket and should be connected to the FTTC modem or router. The lower socket is a BT telephone socket for a phone to c
2 KB (390 words) - 22:48, 5 December 2022
Things to do if you have '''slow FTTC''':
#Go through the [[FTTC Checks]]
5 KB (948 words) - 13:00, 12 June 2023
With FTTC, BT OpenReach used to supply and install a VDSL modem (the Active NTE in BT
= FTTC Modem =
7 KB (1,238 words) - 16:40, 7 December 2021
Although previously unable to get this router working with FTTC, a newer (standard) firmware from Asus (3.0.0.4.374_130) has options that e
870 bytes (148 words) - 09:20, 25 February 2015
...VDSL modem or AA router in bridging/modem-only mode). This is tested with FTTC and a BT VDSL modem.
If you want a 1500 byte MTU on an FTTC connection, it's as simple as changing <code>up</code> in hostname.re0 to <
2 KB (398 words) - 00:17, 18 August 2018
== Tests available to VDSL/FTTC Circuits on TalkTalk Wholesale backhaul ==
VDSL/FTTC Circuits on TalkTalk Wholesale backhaul will be using BT Openreach cabinets
3 KB (424 words) - 11:56, 1 May 2018
=FTTC Checks=
We know it is obvious but please do check power is on to the [[FTTC Modem|Openreach modem]] and your router, that the modem is connected to the
5 KB (931 words) - 13:39, 20 March 2015
*On BT based ADSL, FTTC and FTTP circuits
918 bytes (160 words) - 18:10, 3 January 2019
[[Category:Dropping FTTC]]
1 KB (181 words) - 10:10, 10 April 2019
...band || Configure WAN interface || Further Settings on Control Pages: ADSL/FTTC, Bridge or WAN on port 4 (FTTP) || 2015-02-01
!FTTC wires only
5 KB (810 words) - 00:22, 18 August 2018
The Vigor 130 is an VDSL and ADSL modem. It can be used on an FTTC line when you have your own PPPoE router that doesn't have a built in modem
1,001 bytes (171 words) - 00:19, 18 August 2018
*Modem supports VDSL (FTTC) and ADSL/ADSL2.
*VDSL (aka FTTC)
3 KB (430 words) - 15:32, 25 April 2023
...fibre circuits by Openreach/CityFibre. Not all services will have an ONT. FTTC and ADSL may have a modem instead, or the modem may be built in to the rout
*In our tests, to run an FTTC Modem, router and a DECT base station a 400VA UPS will run for about 45 Min
3 KB (610 words) - 11:38, 30 March 2023
*Modem supports VDSL (FTTC) and ADSL/ADSL2+ (Not G.Fast)
*VDSL (FTTC)
3 KB (470 words) - 10:39, 28 May 2021
! Feb 2015 - Cisco 1841 / FTTC
! Feb 2015 - Cisco 1841 / FTTC
3 KB (446 words) - 10:05, 27 February 2015
The examples below are when using the VMG1312 in router mode on a FTTC line. The VMG1312 is plugged directly in to the phone line (via a SSFP), an
...a large upload happening at the same time. The example above shows a 40/10 FTTC line with a 10Mbit/s rsync backup upload happening. With QoS disabled there
3 KB (503 words) - 01:31, 11 December 2020
...page has information relating to setup of the ASUS RT-N56U router on a BT FTTC line.
and it will work happily with BT's FTTC product which presents as a PPPoE connection
3 KB (508 words) - 09:35, 25 February 2015
= FTTC =
...1154880 Test Channel] as described on the BT website, on an AAISP provided FTTC line. This is [https://community.bt.com/t5/YouView-from-BT/Multicast-Test-C
4 KB (643 words) - 23:56, 29 August 2022
We know it is obvious but please do check power is on to the [[FTTC Modem|Openreach modem]] (if you have one), and your router, that the modem
Most FTTC services installed before summer 2015 are supplied with an [[FTTC Modem|Openreach modem]], if the modem looks faulty - e.g.: No power, DSL li
9 KB (1,497 words) - 15:59, 18 May 2021
* aPPPoE ADSL or FTTC modem, or a fibre ONT (for FTTP). A&A's supplied modems & routers can be co
2 KB (321 words) - 14:37, 6 July 2021
...connection connected to a FB2700 on a single 60Mbit/s down and 20Mbit/s up FTTC, using HMAC-SHA1
2 KB (332 words) - 23:59, 14 March 2017
Traffic capture is available on all our ADSL and FTTC lines.
2 KB (326 words) - 00:06, 15 March 2017
...n using a bridging modem. In such cases you need the LLC-Mux normally. For FTTC and FTTP the only operational mode is PPPoE directly with RFC4638 support a
Typically you'll have a FTTC capable router (ie a router with a built in FTTC/VDSL modem) and will use PPPoE, and you'll need to set a VLAN in the PPPoE
10 KB (1,748 words) - 16:22, 22 February 2023
...r connection to the exchange, e.g. too many people on the fibres from your FTTC cabinet to the exchange
2 KB (394 words) - 08:56, 2 July 2019
*Netgear WNR854T running OpenWRT 10.03 (Backfire) with BT Openreach modem on FTTC
2 KB (359 words) - 12:54, 1 March 2024
...of a fast pipe. -this would be great for leased lines, ethernet services, FTTC, FTTP etc.
3 KB (450 words) - 09:41, 25 March 2015
**This is supported on [[FTTC Modem|BT FTTC]]
6 KB (934 words) - 00:16, 18 August 2018
With BT ADSL and FTTC circuits there is an automatic system to establish that a line is re-syncin
...an issue as cabinets are usually close to premises. There are cases where FTTC can be slower than ADSL all of the way from the exchange.
9 KB (1,602 words) - 16:07, 7 October 2018
A&A BT FTTC - Openreach Modem - FireBrick 2700 - Apple Computer
3 KB (487 words) - 13:26, 24 September 2022
BT can also provide FTTC lines.
FTTC (Fibre To The Cabinet) means that the copper pair is shared at the cabinet
8 KB (1,428 words) - 20:21, 26 September 2023
...XML syntax etc. The examples are relevant for ADSL (Be and BT) as well as FTTC/FTTP through AAISP.
...tup_user@startup_domain" password="" comment="Example PPPoE config for DSL/FTTC/FTTP/etc"/>
25 KB (3,973 words) - 22:57, 26 March 2022
[[File:CQM-FTTC-upload.png|none|frame|Lots of upload in the morning - a backup without any
3 KB (586 words) - 00:20, 18 August 2018
...an isp.def file from AAISP - there are separate isp.def files for ADSL and FTTC services. The files are simply FTP'd to the router, you may use a FTP gui p
4 KB (623 words) - 00:18, 18 August 2018
...the [[ethernet]] ports can support PPPoE - for connecting to an external [[FTTC Modem]] as it does not have a built-in VDSL modem. It has Wi-Fi too.
3 KB (546 words) - 06:44, 29 February 2024
[[Category:FTTC Faults]]
4 KB (642 words) - 16:27, 8 January 2024
Here is another, an FTTC line filling the up link whilst doing a backup (10 Mbit/s)
[[File:CQM-FTTC-upload.png|none|frame|Lots of upload in the morning - a backup without any
22 KB (3,903 words) - 11:53, 3 July 2023
One could use the configuration wizard to setup the TG582n for FTTC, but some of the settings aren't appropriate for ADSL - and my intention is
4 KB (698 words) - 00:19, 18 August 2018
=FTTC Speed Faults=
5 KB (708 words) - 15:03, 16 December 2020
...rOS/Routerboard. The examples are relevant for ADSL (Be and BT) as well as FTTC/FTTP through AAISP.
The LCPFix option needs to be enabled, and the MTU set to 1500 for this FTTC line on the Clueless configuration pages. RouterOS doesn't support RFC4638
10 KB (1,531 words) - 08:30, 30 April 2020
[[File:FTTCModems.png|300px|Openreach FTTC Modems]]
...r has an [[ADSL modem]] built in, but you have a separate VDSL modem on an FTTC line so do not use the routers modem at all.
11 KB (2,057 words) - 00:04, 18 August 2018
|BT Provided Huawei HG612 [[FTTC Modem]]
|BT Provided Huawei HG612 [[FTTC Modem]]
14 KB (1,190 words) - 00:03, 15 March 2017
[[Category:FTTC Faults]]
5 KB (884 words) - 03:31, 23 March 2019
;Circuit ID:The ID for the line when talking to carriers. i.e. BBEU or FTTC.
;DSL:Digital Subscriber Line. E.g. ADSL, FTTC/VDSL, Gfast.
12 KB (1,955 words) - 17:29, 29 September 2022
These 2 FireBricks both happen to be on AAISP FTTC lines, and a normal traceroute would go via the AAISP router, but when the
7 KB (909 words) - 23:49, 30 June 2022
As well as using ADSL or FTTC circuits for Fallback, it can also be done by using one of our 3G or 4G dat
6 KB (989 words) - 13:54, 11 January 2024
**This is supported on BT FTTC
5 KB (763 words) - 00:02, 18 August 2018
You'll need to use an ADSL or FTTC modem in bridge mode for this to work - see the page for your modem to see
* a ADSL or FTTC modem, or a fibre ONT (for FTTP) (as appropriate for your connection)
17 KB (2,744 words) - 10:56, 13 September 2020
[[File:CQM-lowloss.png|border|An FTTC line with 1-3% loss]]
7 KB (1,354 words) - 21:22, 6 January 2015
*VDSL2 is not supported, so these devices cannot be used with FTTC.
9 KB (1,466 words) - 00:17, 18 August 2018
* a PPPoE ADSL or FTTC modem, or a fibre ONT (for FTTP). A&A's supplied modems & routers can be co
14 KB (2,033 words) - 09:15, 25 February 2018
The upshot of all this? It is possible to get BT FTTC (Fibre to the Cabinet) and BT FTTP (Fibre to the Premises) circuits (which
17 KB (2,858 words) - 11:42, 29 April 2024
* a ADSL or FTTC modem, or a fibre ONT (for FTTP) (as appropriate for your connection)
18 KB (2,870 words) - 11:24, 8 December 2022
Last year we had an problem with Huawei FTTC modems, the standard ones that Openreach supply The bug appears to be that
21 KB (3,405 words) - 13:41, 16 June 2020
