Search results

Here is a speedtest from a Road Warrior on a good internet connection connected to a FB2700 on a single 60Mbit/s down and 20Mbit/s up

You can also try connecting to the Internet with just a PC plugged in to the Openreach modem. This will eliminate the r [[Category:Internet]]

Out of the box, you'll notice that you can't access the internet using IPv6. * Allowing all traffic from your LAN to the internet

#Open a browser (Internet Explorer, Firefox etc.) and type 192.168.1.254 or businesshub.home in the a

...ain Name System/Server. Translates domain name to an IP address to have an internet location. ...d:Receiving data over the internet/Sending data to another system over the internet.

...AT, so that the private IPv4 addresses on the LAN interface can access the internet: * IPv4 NAT is configured for LAN devices to access the Internet

== Finding the config from the Internet ==

...Control Pages as well as what you use in your DSL router to log in to the Internet. This uses the xxx@a or xxx@a.1 style username. ...re web site, so that any passwords shown or entered are not visible in the Internet.

When in bridge mode the ZyXEL router will not have access to the internet itself, and so won't have a way to upgrade in this state. To upgrade you ne

''It doesn't seem possible to make it work without two internet

...orts that the downloaded .pem file, when downloaded using default browser 'Internet' is not visible to Strongswan even though the file is in the Download folde

The VoIP services we supply are designed to operate using internet protocol (IP) in the way it was designed - this means that your equipment h ===Broadband/internet services we supply===

There are various Perl scripts available on the internet, and many books on the subject. You do not have access to php or mysql on t

...es, then it may be that calls are being sent direct to your phone from the Internet. This would be because your phone or phone system is not firewalling SIP, a ...me equipment may support the disabling of calls being sent direct from the Internet. For example, Grandstream firmware often has a feature ''Allow Incoming SIP

1. Open an Internet browser and browse to: http://192.168.1.254/ (or whatever IP the router is

Internet Relay Chat (irc) is a simple on-line live chat system. It allows text messa

...line when using TalkTalk's speed tester at [http://internet-speedtest.net internet-speedtest.net]. When you use this tester be sure to put your number in the

...a.net.uk</code>. There are lots of information and SPF 'generators' on the internet. The main thing to do is to test what you have added by looking at the head

*Reduced MTU of 1450 is in operation when L2TP is run over the internet. This restriction can be removed to allow full 1500 byte MTU where direct *

*'''IPv6 access to other resources on the Internet'''

...instance of the DHCPv6 client to be run on it. This will request an IPv6 Internet address, and a single Prefix to be Delegated. You can't get the DHCPv6 cli ...s, any other /64 blocks routed to you won't be able to send packets to the Internet.

...n the same way - providing connectivity from you to us so we can offer you Internet access. There are a few subtle differences though. ...these carriers, connect to our equipment (LNSs) and we connect you to the Internet (via various peers and transit carriers).

*SIP address: Incoming calls can be made from the internet to sip:number@aa.org.uk and delivered just like a normal incoming call. The

...t direct to your email servers and use us a backup in case your servers or internet connection is down. This is set up using DNS for your domain.

=== Testing internet access === Although you can now go on the internet fine, If you look at the RRD graphs or consult the gateway status page you

If you're needing to speed-test your internet service then you can use web-based speed testers such as https://speedtest.

...tal Subscriber Line) services work so has become a term to describe a fast internet connection. The term is then being rather confusingly used to describe fibr ...nies as fibre are not, in fact, fibre optic services to your premises. All Internet access services, even ADSL from the exchange, make use of fibre optic cable

* The use of a VRF allows two routing domains. One for internet traffic (AAISP) where the [[bonding]] is undertaken, a global domain where ...onfigured on my device, one for internal NAT clients, another for external internet facing clients.

This guide is '''NOT''' needed to permit outgoing connections to the internet,

...r, and one for the connection to your LAN. The machine should be ready for internet facing duties, that means strong password! Before you do anything, you'll probably want to connect your linux box to the internet, update it and make sure it has all the tools you need

...Customers, please run the speed tester at [http://internet-speedtest.net/ internet-speedtest.net] (and submit your line number once complete). Please run this

...outers web and telnet interfaces, by either disabling access from the WAN (Internet) altogether, or by restricting access by IP address. These settings are mad nat ifconfig intf=Internet translation=disabled

#Congestion somewhere between the premises and the internet causing slow-downs # '''Connect directly in to the ONT''' <br> It's possible to use the internet without the use of the router. You can connect your computer directly in to

...ve sky broadband so I created a WAN :interface called SKY, and refer to my internet connection as SKY, or SKY_ONLY

...D -i DEV_LAN -o pppoe-AA_1 -m comment --comment "Allow traffic from LAN -> internet" -j ACCEPT ...D -i DEV_LAN -o pppoe-AA_2 -m comment --comment "Allow traffic from LAN -> internet" -j ACCEPT

...r PPPoE capable router will plug in to the LAN port and connect you to the internet.

...nections which can be via multiple ADSL lines that are even from different internet providers.

...dafone SIM, the username was web, the password was web, and the APN was pp.internet. {Administrator}=&gt;:ppp iflist intf=Internet

*MTU 1500 is not supported on some setups (Internet access will still work fine, but we'd like 1500) - (ZyXEL will not provide ...n to the ZyXELs own web interface when trying to access a website when the internet connection is down, this applies for http and https traffic. This is not a

| Log || Configure Local logging || Logs: System, PPPoE, XDSL, Internet, Attack, Account. || 2015-05-29

When in bridge mode the ZyXEL router will not have access to the internet itself, and so won't have a way to upgrade in this state. To upgrade you ne

...ng your Firebrick to a .css file that is stored in a website on the public Internet might, in theory at least, have security implications. Certainly review sec ...lling in an evil .css file is an open question. Some versions of Microsoft Internet Explorer for Windows could cause code to be executed when ''triggered from

*''Basic Settings'', ''Internet Protocol'', select ''Both, prefer IPv6'' (or, if you're brave, select ''IPv

At this point you should be able to browse the internet and connect to the Vigor. The PPPoE interface should have the /32 address

Some devices I have allow all IP addresses to control them, but also need internet access for some functionality

...does not support IPv6, so this seems safe. IPv6 is the current version of internet protocol so it seems odd that it is disabled by default.

** '''Solid Green''': Internet service has been established

...Server Only --> Set to Enabled (This stops direct 'ghost calls' from the internet, and only allows calls from the registered SIP server)

You'll probably also want to ensure your LAN is protected from the big bad internet by a firewall. I did this by including two files in /etc/network/if-up.d/.

You can also try connecting to the Internet with just a PC plugged in to the Openreach modem. This will eliminate the r